How do you do per-key RGB lighting on a Shift V2?
I saw the online configurator that lets you do this on the Shift V1, where it spits out a compiled firmware file to flash. The V2 doesn't seem to have this function in the Windows configurator, though. I can't imagine the answer here is "you're going to have to manually write the hex for every key in QMK, compile it, and flash that".
Apr 18, 2024
Step 2 Specifically: "Solder the diodes onto the *backside* of the PCB" "NOTE: Kits contain both surface-mount and through-hole diodes. *It is recommended you use the surface-mount diodes as the through-hole diodes create spacing issues* in Step 10 (the sandwiched plate does not sit flush against the PCB surface). If you do use the through-hole diodes (again, not recommended), you will have to clip the solder joint very close to the PCB surface so that the sandwiched plate is as close to the PCB as possible."
Paste: http://www.amazon.com/gp/product/B005C6H26C/ Rework Station: https://www.sparkfun.com/products/10706