Hexapod Spider Robot Bundle w/Remote Control
Full Freedom of Motion
Use your Arduino to take control of a six-legged freak with this Hexapod Spider Bundle from SainSmart. Made from aluminum alloy with long 9-inch legs, the hexapod is capable of moving in all directions to spur your creative nature. Program it to move forward and back, dance, and even climb over tough terrain when you’re outdoors. As for the SR318 Servo, it’s got onboard memory to control the 32 motors simultaneously—not to mention a whopping 500 commands can be saved. The kit comes with everything you need to build the robot excluding batteries and electronics, and it even comes with a remote control for easy maneuvering. See the video below for more details.
Note: This drop includes the robot, SR318 Servo Motor, remote control, and control board.
Video Demo:
Specs
- Material: 3 mm aluminum alloy
- Robot shell with installation hole for switch and controller
- 18DOF, each leg 3DOF joint
- Leg length: 9 in (23 cm)
- Body shell size: 6.9 x 6.1 in (17.5 x 15.5 cm)
- Directions: Forward, backward, turning, dancing, climbing
- The robot has been designed to use SR318 Servos (Max torque 15kg) for the legs
32-Channel Servo Motor Control Driver Board:
- Flash memory: onboard 512K ROM (If every command is used to control the 32 motors at the same time, more than 500 commands can be saved.)
- Controlling MCU power supply: 6.5~12 V or 3.5~5.5V. (USB can be used to power the chip on servos board. It can be chosen automatically.
- Servos power supply: DC (depends on the motors, generally 5V DC)
- Control channels: 32.
- Communication input: USB or UART (TTL or USART)
- Signal output: PWM (Accuracy 1us)
- Servo motor resolution: 1us, 0.09º
- Baud rate: 9600,19200,28400,57600,115200,128000(recognized automatically)
- Servo motors supported: Futaba, Hitec or some other Servos Motor controlled by PWM
- Dimensions: 2.5 x 1.7 x .05 in (6.4 x 4.4 x 0.15 cm)
- Control mode: USB and UART (TTL) to accept command
SR318 Servo:
- Speed: (sec/60°):
- 13Kg.cm/0.16sec/60°@5.0V
- 15Kg.cm/0.15sec/60°@6.0V
- 16Kg.cm/0.14sec/60°@7.4V
- Voltage (V): 5-7.4V
- Dimensions(mm): 1.6 x 08 x 1.6 in (4 x 2 x 4 cm)
- Parameters: Digital servo, 1723 core motors, copper gear
Included
- PS2 Wireless Controller Receiver
- USB Cable
- 32-Channel Servo Motor Control Driver Board
- 12 Servo brackets
- 6 Upper legs
- 6 Lower legs
- 2 Mounting plates
- 6 Cup bearings
- 18 SR318 servos
- 18 Metallic servo wheels
- Screws and nuts
Shipping
Estimated ship date is Apr 19, 2017 PT.
Payment will be collected at checkout. After this product run ends, orders will be submitted to the vendor up front, making all orders final.
Ask the Community!
