Click to view our Accessibility Statement or contact us with accessibility-related questions
jH4nn3s
3
Oct 24, 2016
Hey guys, I just assembled my keyboard. The hardware as such appears to work fine. However, I got the Zealios 65g Tactile (Purple) switches. One stopped working mechanically right away during the assembly process . Another one was always actuated upon connecting the board for the first time with the computer. In addition, I identified about 5 additional switches whose actuation is dysfunctional and causes key chattering upon a single press. I suppose I will have to open these up as well and fumble around with the metal parts.
Is this a known issue for Zealios switches? It appears to me that the metal parts are often not properly aligned inside... could I have caused this during soldering? Heating the components too much or something perhaps (used 340° C).
EDIT: I just got a super nice reply by Henry from Zealios switches/Zeal PC. He explained to me that the transparent switches have a lower melting point due to a fiber glass percentage. Being a layman solderer I probably overheated them, causing the bottom part of the plastic to deform ever so slightly. He also gave me instructions on how to fix the key-chattering with an image containing arrows etc. He also recommended heating the joints for no more than 2-3 seconds during soldering. So, a big public thank you to Zealios switches for the explanation and the great support!
CptCarnage
45
Oct 24, 2016
jH4nn3sThanks for the tip! Using a 25w fixed soldering iron this might happen to me as well.
bendrexl
68
Oct 25, 2016
jH4nn3sYeah - switch pins require *very* little heat to take solder. Touch the PCB first, then the pin, then a bit of solder. Takes a bit of practice, but each pin should take ~1 second, not any longer than 2. (just my experience)
jH4nn3s
3
Oct 25, 2016
jH4nn3sJa, learning curve, I guess :) Luckily, I was able to fix all chattering switches though. In case this kind of thing happens to anybody else: I got the following instructive picture from zeal pc. To fix key chattering after possibly overheating the switches during soldiering, use a small flat head screwdriver and gently nudge the fatter, non moving leaf (purple in the image) towards the center post 2-3 times. In my case, that center leaf was also a bit rotated and warped. Gently bending it straight/parallel to the opposite metal leaf again resolved all issues in all dysfunctional switches I had. I guess it's an obvious thing to do to hindsight once you understand what's going on ;) Mkay. Next time.
search
PRODUCTS YOU MAY LIKE
Trending Posts in Mechanical Keyboards