Do I Need to Lube My Keyboard Switches?
Figure 1: Sometime around here is a good time to ask that question... If you’re new to the mechanical keyboard hobby, I have no doubt that planning your first keyboard build is a bit of a daunting task. To be entirely honest with you, it’s only a tiny bit less daunting for your second or even third keyboard builds should you stay around a little while longer. You’ve got the keyboard itself to worry about, stabilizers, keycaps, and even switches on top of all of the intangible marks you want your dream keyboard to hit. Switches are especially daunting right out of the gate as there’s just so many options out there to pick from – each with their own unique specifications, manufacturers, and more. Yet, in spite of all of these differences between switches, time and time again I find people always asking about lubing switches as one of their chief concerns when it comes to picking some up. With countless numbers of content creators talking about lubing switches, its no...
Apr 17, 2024
I finally finished my Infinity Ergodox keyboard. I received my Carbon SA keycaps yesterday.
This has been an excellent keyboard! It has also been fun to learn to type on it. The layout of the keys is comfortable, and the mechanical switches themselves are a nice feel on this keyboard.
For keycaps I am using the GMK Carbon SA keycaps modifiers and the PBT Double-Shot keycaps (Slate/Lilac) from another drop for the alphas. As I just installed them, I am still figuring out how I like the two sets together (The grays are ever so slightly different.)
I took some time to figure out the default layout, then looked online to see what others were doing. I ended up with a main layer and three additional layers , and I am enjoying it, as I don't have to move my fingers off home row (Except when using linux/unix style vi arrow keys ¯\_(ツ)_/¯ I mapped my windows arrow keys to match this, since I use both OSes ). The first layer is the default function keys over the number keys, and I added the arrow keys to HJKL. On the second layer I made the numbers be a layer lock for all the different layers (I was experimenting on the 4th and 5th layer with different thumb clusters layouts.) The third layer is a COLEMAKs layout, and I plan one day to learn to type using that layout
Here is my current layout:
The switches are Cherry MX Browns, and I like the slight tactile'ness to them, but thought the springs were a little light (I am guessing 45g-48g). So I ordered 78g and 68g springs from Originative Co to replace some of the keys. I ended up replacing the entire home row with 78g springs, then replaced the keys above and below with 68g springs. The 2u thumb cluster keys were replaced with 78g springs. This has been a better feel (Less accidental presses when my finger slightly touches another key during a press.) I might in the future replace the 78g's with 68g's and replace the 68g's with 58g's.
I am working on a way to know when CapsLock, NumLock, and ScrollLock are "ON", so far my thoughts have been to add LED's along the thumb cluster edge (CTRL, ALT, and END/PGUP), or reprogram the LCD screen to show a status bar with the different icons. I would love to know what others are doing to know the status.
I am tenting my keyboard with the Kinesis tents (V3 Accessory for FreeStyle2) that I modified to let them lay flat on the keyboard. I am testing two methods of attaching them (Velcro and some thin plywood that I cut wedged and dovetailed, then superglued to each side.) both methods seem to work well so far, and I usually tent it to the 10 degree mark.
Here an image:
I still need to make a case for this, since I haul it back and forth to work in my backpack. I am currently using a folded up towel, and each half slides down into it a separate pouch. It is a little bulky, and I think a little woodworking would create a nice solution.
Well, that's all folks, thanks for reading :-)
MD sent me replacement PCBs but now I have to de-solder 80+ switches and transfer them to the new PCB. I asked MD to send me switches + PCBs and I will return the ones I got but that was a no go. Some day this year (hopefully) I will find time to de-solder the switches and try your idea out.
I am worried about water damage on it though. My hands tend to sweat a bit in warm temperatures.
In case this information helps, some of the LEDs work if I put positive side to the right and some (on the same hand) work if I put negative side to the right. Some don't work at all.
I thought some connection got reversed somewhere maybe that's why this happened but I don't know what to look for. I didn't know there were LED driver chips in there as well. If you can help me out, I will be very grateful.