MAKERbuino STEM Education Kitsearch

MAKERbuino STEM Education Kit

MAKERbuino STEM Education Kit

bookmark_borderSave
Where's the price?
To negotiate the best possible price for our members, we must agree to hide our prices externally.


DIY Retro Gaming Console

Build your own handheld gaming device with the MAKERbuino STEM education kit. Available with or without assembly tools, the kit comes with a MAKERbuino board, an acrylic case, a 0.5-watt speaker, a lipo battery, an RS232 adapter board, an ATmega328P-PU microcontroller, a 128MB SD card loaded with games, a USB-TTL programmer board, and a variety of capacitors, switches, and resistors. The MAKERbuino board has an open-source interface that can be programmed with an Arduino or Arduino-compatible devices. In addition to all the device components, you’ll also receive detailed instructions for soldering the various electronic devices on the console. 

Note: At checkout, choose the MAKERbunio standard kit (base price) or the MAKERbuino kit with tools (+ $14.99). You’ll also have the option to add an assorted button cap pack (+ $3.99), a multiplayer link cable (+ $4.99), the SainSmart ES120 rechargeable screwdriver (+ $89.99), and the SainSmart Pro 32-piece soldering tool set (+ $59.99). 

Kit With Tool (+ $14.99)

Button Cap Pack (+ $3.99)

Multiplayer Link Cable (+ $4.99)

Included

MAKERbuino Standard Kit

  • MAKERbuino PCB
  • Laser cut acrylic casing (consists of 3 pieces) 
  • (4) M3 nylon screws 
  • (4) M3 nylon nuts
  • (8) M3 6mm nylon hex distancer
  • (2) M2 nylon screws
  • (2) M2 nylon nuts
  • (2) M2 nylon spacers
  • 128MB Micro SD card + SD adapter
  • SD socket
  • Insulated wire for connecting the speaker
  • 8ohm 0.5W speaker w/ 28mm diameter
  • Li-Po battery (650mAh, single cell - 3.7V) with male JST connector 
  • Female JST battery connector (should already be mounted on the board)
  • USB to RS232 adapter board (serial programmer) 
  • 6-wire male to female cable for connecting the serial adapter board 
  • ATmega328P-PU microcontroller in PDIP package 
  • 28 pin PDIP IC socket (for the ATmega328P) 
  • LCD–Nokia 5110 LCD breakout board 
  • TP4056 micro USB Li-Po battery charger board
  • 3.3V voltage regulator (MCP1702-3302E in TO-92 package) 
  • 2n2222 general purpose NPN transistor (TO-92 package)
  • 16MHz crystal 
  • 1N4148 diode 
  • (2) 3 pin slide toggle switches 
  • (2) 100nF ceramic capacitors
  • (2) 22pF ceramic capacitors
  • (3) 100uF, 6.3V radial electrolytic capacitors
  • (7) pushbuttons with button caps
  • Standard double row 3x2 pin angle headers (male) - for SPI port
  • Standard single row 6 pin angle headers (female) - for Serial port 
  • (2) KF2510-4P angle male connectors - for i2c expansion ports 
  • Breakout standard double row 5x2 pin angle headers (male) - for breakout port
  • (2) 1Kohm wheel trim potentiometer
  • 2.2Kohm resistor
  • (2) 10Kohm resistors
  • (2) 4.7kohm resistors
  • 100ohm resistor
  • 3.5mm headphone connector socket

MAKERbuino Kit With Tools

  • MAKERbuino PCB
  • Laser cut acrylic casing (consists of 3 pieces) 
  • (4) M3 nylon screws 
  • (4) M3 nylon nuts
  • (8) M3 6mm nylon hex distancer
  • (2) M2 nylon screws
  • (2) M2 nylon nuts
  • (2) M2 nylon spacers
  • 128MB Micro SD card + SD adapter
  • SD socket
  • Insulated wire for connecting the speaker
  • 8ohm 0.5W speaker w/ 28mm diameter
  • Li-Po battery (650mAh, single cell - 3.7V) with male JST connector 
  • Female JST battery connector (should already be mounted on the board)
  • USB to RS232 adapter board (serial programmer) 
  • 6-wire male to female cable for connecting the serial adapter board 
  • ATmega328P-PU microcontroller in PDIP package 
  • 28 pin PDIP IC socket (for the ATmega328P) 
  • LCD–Nokia 5110 LCD breakout board 
  • TP4056 micro USB Li-Po battery charger board
  • 3.3V voltage regulator (MCP1702-3302E in TO-92 package) 
  • 2n2222 general purpose NPN transistor (TO-92 package)
  • 16MHz crystal 
  • 1N4148 diode 
  • (2) 3 pin slide toggle switches 
  • (2) 100nF ceramic capacitors
  • (2) 22pF ceramic capacitors
  • (3) 100uF, 6.3V radial electrolytic capacitors
  • (7) pushbuttons with button caps
  • Standard double row 3x2 pin angle headers (male) - for SPI port
  • Standard single row 6 pin angle headers (female) - for Serial port 
  • (2) KF2510-4P angle male connectors - for i2c expansion ports 
  • Breakout standard double row 5x2 pin angle headers (male) - for breakout port
  • (2) 1Kohm wheel trim potentiometer
  • 2.2Kohm resistor
  • (2) 10Kohm resistors
  • (2) 4.7kohm resistors
  • 100ohm resistor
  • 3.5mm headphone connector socket
  • Diagonal cuting pliers
  • Screwdriver
  • Needle-nose pliers
  • USB soldering iron
  • USB cable
  • Metallic soldering iron holder
  • Small sponge 

SainSmart ES120 Rechargeable Screwdriver (Optional)

  • Work voltage: DC3-5V
  • Material: 304 stainless steel
  • No-load speed: About 270 rpm
  • Electronic torque: 2.8 kgf.cm
  • Maximum torque: 30 kgf.cm (manual mode)
  • Screwdriver bit: 4M hexagon
  • Charging time: 45 minutes
  • Running time: 30 minutes (full power)
  • Charging mode: Micro USB 5V input
  • OLED screen
  • Battery: 10440 lithium-ion
  • Rotor: Bi-directional overrunning clutch
  • Gearbox: 1:144 integrated planetary gearbox
  • Motor: 25,000 rpm brush motor
  • Main chip: STM32
  • Sensor: Angular velocity sensor

SainSmart Pro 32-Piece Soldering Tool Set (Optional) 

  • Operating voltage: 12V to 24V
  • Power: 17W to 65W
  • Screen: OLED
  • USB port: Micro USB
  • Power port: DC5525
  • Temperature stability: ± 2%
  • Soldering tip resistance to ground: < 2Ω
  • Temperature range: 212–752°F (100–400°C)
  • Dimensions, control part: 3.8 x 0.6 in (9.6 x 1.65 cm)
  • Dimensions, heating part: 2.8 x 0.2 in (7.2 x 0.55 cm)
  • Compliant with EU certification: CE FCC

Shipping

All orders will be shipped by Massdrop.

Estimated ship date is Oct 12, 2018 PT.

After the drop ends, payment will be collected and the group’s order will be submitted to the vendor up front, making all sales final. Check the discussion page for updates on your order.

Recent Activity

Joined the drop

Joined the drop

Joined the drop