*Help* Screw in stabilizers not fitting in Dropshift V2 keyboard
I'm trying to build a mechanical keyboard with screw in stabilizers, I've build some mechanical keyboards with click-in stabilizers, never with screw in. Somehow one of the pins of the metal top-part collides with the screw in stabilizer of the numpad "enter key". I already tried grinding of a bit of the pin that collides with the stabilizer, but unfortunately I can't make it fit/close properly. You can see that the pin of the toppart leaves a mark on the bottompart of the stabilizer, see picture 2. What am I missing? Using Durock V2 in a Dropshift fullsize V2. See pictures below, thanks in advance!
Apr 23, 2024
We confirmed today that the Planck Light PCB's were not flashed properly at the manufacturer and they are arriving without the bootloader. This means your keyboard will arrive functional and usable, but without reprogramability.
Right now we are working with Jack to restore the reprogramability that was designed to be there. At the moment we are looking to fix this by creating a module that will allow you to flash the PCB using the In-System Programming which should be the fastest and simplest method.
That said, we will need some time to create and test that module. We are evaluating timelines with our manufacturer now and will reach out to everyone with any updates and an expected ship date as soon as we have more information.
My apologies for this issue and we are working to get everything taken care of as quickly as possible.
We'll be making a device that we'll send to everyone so they can use it and load the bootloader onto the PCB. This will return the proper functionality to the Planck Light keyboard including the ability to reprogram it.
@jeffeb3 we are working with Jack on instructions and will post them for those that already can ISP flash.
If you have the QMK repo downloaded, you can find the at90usb1286's bootloader hex in the util directory. If not, you can find it on github.
As for the pin config, I'm not really sure.
What I did personally is use a header and a few of these jumpers: https://www.adafruit.com/product/266 connected to the appropriate pinouts on a teensy that I own with the teensyduino AVR ISP firmware flashed. I then hold the header to the board by hand to flash as the flashing process is over is <20 sec or so
Thanks,
-=Marc=-
Software: 1) AVRDUDESS 2) USBasp drivers 3) qmk bootloader hex file
/u/hyliansavior has a good thread on Reddit with more detail.