Optoma GT5500+ UST Gaming Projector
8 Feet of Full HD Picture in Tight Spaces
If you’ve never heard of a short-throw projector, you’re not alone. It works by projecting an image directly into a high-quality mirror and throwing the image back at a larger surface. The result is a cinematic experience in the comfort of your own home, without lengthy cables and complicated setup. This gaming projector boasts a 1920 x 1080p resolution and a projection image over 8 feet wide—at just 17 inches away from the wall. Capable of producing up to 3,500 lumens (more than most high-powered tactical flashlights), it’s super bright and vivid. It also supports 3D content from Blu-ray players, gaming consoles, and more—and you can even connect them wirelessly. To use it, mount it or lay it flat next to the wall, turn it on, connect it to your video source, and press play.
Note: This drop has limited quantities available.
Specs
- Display Technology: Single 0.65 in (1.6 cm) DC3 DMD DLP Technology by Texas Instruments
- Resolution: 1920 x 1080p
- Brightness: 3,500 Lumens
- Contrast Ratio: 25,000:1
- Throw Ratio: 0.25:1 (distance/width), ±5% Variance
- Zoom Type: Fixed Zoom
- I/O Connectors: 2x HDMI (1.4a 3D support), 3D-Sync Port Out, VGA1-In (YPbPr/RGB), VGA2-In/VGA-Out (shared), Composite Video, Audio1-In (analog RCA), Audio2-In (3.5 mm), Audio-Out (3.5 mm), RJ45, RS-232C, mini USB (remote mouse/service, 12V trigger, Mic, USB-A (power)
- Speaker: 16-Watt speaker
- Keystone Correction: ±40° Vertical
- Aspect Ratio: 16:9, 4:3, 16:10 (LBX, Native, Auto)
- Offset: 118%
- Projection Screen Size: 80–100 in (2.03–2.54 m) Diagonal 16:9
- Projection Distance: 17.7– 22.1 in (0.45–0.56 m)
- Projection Lens: F/2.4; f=3.72 mm, Fixed Zoom
- Uniformity: >85%
- Maximum Resolution: WUXGA (1920 x 1200)
- Computer Compatibility: WUXGA, UXGA, SXGA, WXGA, HD, XGA, SVGA,VGA, SVGA, VGA, Mac
- Video Compatibility: PAL (B, D, G, H, I, M, N, 576i/p), NTSC (M, 4.43/3.58 MHz, 480i/p), SECAM (B, D, G, K, K1, L) HD (1080i, 720p)
- 3D Compatibility: Supports all HDMI 1.4a mandatory 3D formats (Frame pack, side-by-side, top-bottom) and up converts frame rate from 60Hz to 120Hz or 24Hz to 144Hz (i.e 60 or 72 frames per eye). 3D glasses are needed and are sold separately
- Horizontal Scan Rate: 15.3–91.1kHz
- Vertical Scan Rate: 24–85Hz (120Hz for 3D)
- Displayable Colors: 1.07 Billion
- Noise Level (Eco mode): Min 29dB–Max 36dB
- Power Supply: AC Input 100–240V, 50–60Hz, auto-switching
- Power Consumption: Bright 320W Typical, 350W Max / ECO+ 270W Typical, 300W Max
- Operating Conditions: Operating Temp at Sea Level to 10,000 feet = 73ºF (Must manually switch to high altitude mode 5,000 feet & above to maintain optimal functionality)
- Operating Temperature: 41–104°F (5–40°C), 85% max humidity
- Security: Kensington lock, security bar, and keypad lock
- Remote Control: IR remote
- Video: PAL (B, D, G, H, I, M, N, 576i/p), NTSC (M, 4.43/3.58 MHz, 480i/p), SECAM (B, D, G, K, K1, L) HD (1080i, 720p)
- Dimensions (W x H x D): 15.2 x 12.2 x 4.7 in (38.5 x 31 x 12 cm)
- Weight 10.7 lbs (4.85 kg)
Included
- AC power cord
- VGA cable
- USB cable
- Remote control
- Batteries
- Quick-start card
- CD user manual
- 1-year limited parts and labor warranty, 90 days on lamp
Shipping
Estimated ship date is Dec 14, 2017 PT.
Payment will be collected at checkout. After this product run ends, orders will be submitted to the vendor up front, making all orders final.
Ask the Community!
