RØDE VideoMic Pro w/ Rycote Lyre Shock Mountsearch

RØDE VideoMic Pro w/ Rycote Lyre Shock Mount

RØDE VideoMic Pro w/ Rycote Lyre Shock Mount

bookmark_borderSave
Where's the price?
To negotiate the best possible price for our members, we must agree to hide our prices externally.


True Shotgun Microphone

Featuring an all-new capsule for lower noise and higher sensitivity, the RØDE VideoMic Pro ensures you have what you need to get the sound you want. This compact directional microphone is designed for use with DSLRs, camcorders, and portable audio recorders—at just 3 ounces, it won’t weigh you down. The tight pickup area and supercardioid pattern reduce isolate distracting background noise, so your subject can really shine, while the integrated Rycote Lyre shock mount keeps bumps and vibrations from interfering with your sound.

RØDE VideoMic Pro w/ Rycote Lyre Shock Mount

Construction & Controls

At the heart of the VideoMic Pro is an all-new half-inch capsule that provides broadcast-quality audio with an incredibly low self-noise of 14 dB. To prevent low-end noise (like traffic and air conditioners) from being recorded, switch from the mic’s native 40 Hz to 20 kHz frequency range to the high-pass filter at 80 Hz. Use the -10 dB level attenuation for live music and close interviews, and the 20 dB level boost when recording with your DSLR. Great for when you’re shooting non-stop, the 9V battery is good for about 70 hours of use.

RØDE VideoMic Pro w/ Rycote Lyre Shock Mount
RØDE VideoMic Pro w/ Rycote Lyre Shock Mount
RØDE VideoMic Pro w/ Rycote Lyre Shock Mount
RØDE VideoMic Pro w/ Rycote Lyre Shock Mount

Specs

  • RØDE
  • International Spec
  • Acoustic principle: Line gradient
  • Active electronics: JFET impedance converter
  • Capsule: 0.5 in (1.3 cm)
  • Polar pattern: Supercardioid
  • Address type: End
  • Frequency range: 40 Hz – 20 kHz (selected HPF at 80)
  • Output impedance: 200 ohm
  • Maximum SPL: 134 dB SPL (at 1 kHz, 1% THD into 1 kohm load)
  • Sensitivity: - 32 dB re 1 V/Pa (20 mV at 94 dB SPL) +/- 2 dB at 1 kHz
  • Equivalent noise level (A-weighted): 14 dB - A
  • Integrated Rycote Lyre shock mounting
  • Integrated foam windscreen
  • Integrated camera shoe mount with 0.4 in (1 cm) thread
  • 2-step high-pass filter (flat, 80 Hz)
  • 3-position level control (-10 dB, 0, 20 dB)
  • Output: ⅛ in (3.5 mm) mini jack (dual mono)
  • Battery: 9V
  • Battery life: > 70 hrs
  • Dimensions: 3.9 x 3 x 6.7 in (10 x 7.5 x 17 cm)
  • Weight: 3 oz (85 g)
  • Designed and made in Australia

Shipping

All orders will be shipped by Massdrop.

Estimated ship date is Feb 10, 2017 PT.

After the drop ends, payment will be collected and the group’s order will be submitted to the vendor up front, making all sales final. Check the discussion page for updates on your order.