FPV HQ ShenDrones Tweaker 180mm FPV Addiction Kit
FPV HQ ShenDrones Tweaker 180mm FPV Addiction Kit

Pro-Level 180mm Racing Drone Kit

Designed to build up as easily as a mini with all the same components, the ShenDrones Tweaker is incredibly agile and fun to fly. This 180mm micro quad is quicker and more point-and-shoot than a mini, and easier to move through gaps, with 4-inch propellers and 20-50 degrees of built-in FPV camera tilt.

This kit requires full assembly and includes the following: four DYS XSD 20A ESCs, four DYS SE2205 2550KV motors, a Furious FPV Radiance flight controller, a HS1177 FPV camera with a 3D-printed camera mount, a FX799T 200mW 5.8GHz 40ch video transmitter with an SMA pigtail, a Foxeer Stubby RHCP 5.8GHz antenna, an RROSD (PDB + OSD), a Tattu 4S 1300 75C LiPo battery, a 16AWG XT60 pigtail, a FPVHQ LiPo strap, and two sets of DALPROP4045x3 Propellers.

Note: All items needed to build the drone are included in the kit, except a transmitter/receiver and FPV goggles, which you can add to your order at checkout for an additional cost. Choose the FrSky Taranis transmitter (+ $190), Spektrum DX6 transmitter (+ $200), FrSky XSR receiver (+ $26), Spektrum Quad Race receiver (+ $22), FatShark Dominator V3 goggles (+ $325), or XT Marvel Vision 5.8GHz FPV goggles (+ $99). You can also add an extra battery (+ $25) and an extra set of propellers (+ $4).

FPV HQ ShenDrones Tweaker 180mm FPV Addiction Kit
FPV HQ ShenDrones Tweaker 180mm FPV Addiction Kit
FPV HQ ShenDrones Tweaker 180mm FPV Addiction Kit

Included with Tweaker 180 FPV Addiction Build Kit

ShenDrones Tweaker FPV Addiction
HS1177 FPV camera
DYS SE2205 2550KV motors x 4
Tattu 4S 1300 75C LiPo battery
DYS XSD 20A ESCs x 4
RROSD (PDB + OSD)
Furious FPV Radiance flight controller
FX799T 200mW 5.8GHz 40ch video transmitter with SMA pigtail
Foxeer Stubby RHCP 5.8GHz antenna
16AWG XT60 pigtail
DALPROP 4045  (2CW & 2CCW)
FPVHQ LiPo Strap

Optional Add-ons

FatShark Dominator V3 goggles (+ $325)
XT Marvel Vision 5.8GHz FPV goggles (+ $99)
FrSky Taranis transmitter (+ $190)
FrSky XSR receiver (+ $26)
Spektrum DX6 transmitter (+ $200)
Spektrum Quad Race Receiver (+ $22)
Extra Battery (+ $25)
Extra Set of DALPROP 4045x3 Propellers 2CW & 2CCW (+ $4)

Flight Demo

Included

  • ShenDrones Tweaker FPV Addiction
  • DYS XSD 20A ESCs x 4
  • DYS SE2205 2550KV motors x 4
  • Furious FPV Radiance flight controller
  • HS1177 FPV camera
  • FX799T 200mW 5.8GHz 40ch video transmitter with SMA pigtail
  • Foxeer Stubby RHCP 5.8GHz antenna
  • RROSD (PDB + OSD)
  • Tattu 4S 1300 75C LiPo battery
  • 16AWG XT60 pigtail
  • FPVHQ LiPo strap
  • DALPROP 4045x3 (2CW & 2CCW)

Optional Add-Ons

  • FrSky Taranis transmitter
  • FrSky XSR receiver
  • Spektrum DX6 transmitter
  • Spektrum XSR receiver
  • FatShark Dominator V3 goggles
  • XT Marvel Vision 5.8GHz FPV goggles
  • Tattu 4S 1300 75C LiPo battery
  • DALPROP 4045x3 (2CW & 2CCW)

Specs

ShenDrones Tweaker FPV Addiction (Included)

  • Frame type: Quadcopter
  • Frame material: Carbon fiber
  • Frame size: 3.46 in (88 mm)
  • Max prop size: 4 in (101.6 mm)
  • Updated 3D printed FPV camera mount snaps at: 5º, 20º, 35º and 50º
  • Space between body plates: 1.38 in (35 mm)
  • Weight: 87 g (3.06 oz)
  • Motor compatibility: up to 2200 series
  • Bottom plate: 0.16 in (4 mm)
  • Top plate: 0.08 in (2 mm )

DYS XSD 20A ESCs x 4 (Included)

  • BLHeli_S does damped light only
  • Firmware upgradeable via signal wire (works with USB Linker for XM series)
  • Silabs EFM8BB21
  • Supports motors with super-high KV (EFM8BusyBee 50MHz can handle up to 500k eRPM)
  • Supports Dshot600, Dshot300
  • High-current burst rating
  • High-resolution throttle steps
  • Input voltage: 3–4S LiPo
  • Dimensions: 24 x 14 x 4.5 mm (0.94 x 0.55 x 0.18 in)
  • Weight: 0.15 oz (4.32 g)

DYS SE2205 2550KV Motors x 4 (Included)

  • Includes: DYS SE2205 2550KV motor, 2pc M5 prop nut, 4 M3 x 5, 4 M3 x 7, motor wire, 8mm wrench
  • New motor from DYS with imported NMV bearing
  • N52 magnet and 0.2mm lamination
  • Powerful with 1.1 kg thrust to work with BN5045 prop
  • Hollow shaft with screw to fix the shaft
  • KV: 2550
  • Configuration: NP
  • Stator diameter: 0.87 in (22 mm)
  • Stator length: 0.2 in (5 mm)
  • Shaft diameter: 0.12 in (3 mm)
  • Motor dimensions: 1.09 x 0.75 in (27.7 x 19 mm)
  • Weight: 30 g (1.06 oz)
  • Number of cells (LiPo): 3–5S
  • Max continuous current: 27.8A
  • Max continuous power: 411.4W
  • Internal resistance: 0.08 ohms

Furious FPV Radiance Flight Controller (Included)

  • Stackable 4-in-1 ESC ready
  • Designed for Acro precision with CG perfection
  • High-performance, user-friendly F3 MPU6000 chip
  • Built-in high-power BEC
  • Integrated LC filter for perfect clarity
  • iLap transponder
  • Incorporated current-sensor monitor input
  • Latest-generation F3 processor chip
  • 2S–6S ready
  • Compact design
  • Gold-plated pads for excellent connectivity
  • Heavy-duty 2A BEC at 5V output and 0.8A BEC at 12V Output
  • Firmware perfection via CleanFlight and BetaFlight
  • BLHeli pass-through setup
  • SBUS ready with built-in inverter
  • Included Spektrum satellite port
  • Frsky telemetry, ready and waiting
  • Full USB support
  • Built-in buzzer
  • Dimensions: 1.42 x 1.42 x 0.3 in (36 x 36 x 7.7 mm)

Foxeer HS1177 FPV Camera (Included)

  • Includes: Camera with 2.8mm lens, mounting bracket, camera cable with male servo end, OSD joystick cable
  • Model: XAT600M
  • CCD: ⅓ in Sony SUPER HAD II CCD
  • DSP model Nextchip 2040
  • Pixels: NTSC 768 x 494
  • TV system: NTSC
  • Resolution: 650TVL(b/w), 600tvl(color)
  • Synchronization: Internal synchronize
  • Shutter speed (CCD IRIS): NTSC: 1/60~1/100000 sec
  • Noise: > 60 (AGC OFF)
  • Video out: 75 ohm, synchronize
  • Min Illumination: 0.01 Lux
  • Auto gain: Off / Low / Mid / High
  • Back-light compensation: (BLC) Off / Back light compensation / Strong light suppression
  • Private shading: (PRIVACY) 1~8 private shading area
  • Motion detection: (MD) On / Off (Multi-level sensitivity settable)
  • Auto white balance: Manual / Auto / Auto track
  • Mirror: Horizontal mirror optional
  • Negative: Positive / Negative optional
  • Color to B&W: Auto
  • DNR: 2DNR
  • WDR: D-WDR
  • Day/night shift: Auto / Color / B&W
  • Menu (OSD): English menu
  • White-dot repair: Support
  • Image adjustment: Support
  • Camera title: Support
  • Power requirement: DC5V~22V
  • Working temperature: -10 C ~ 50 C
  • Working humidity: 20~80%
  • Storage temperature; -40 C ~ 60 C
  • Storage humidity: 20~95%
  • Dimensions: 0.98 x 0.98 in (25 x 25 mm)
  • Weight with bracket: 0.51 oz (14.6 g)
  • Power consumption: 70 mA
  • IR-Cut for daylight use

FX799T 200mW 5.8GHz 40ch Video Transmitter w/ SMA Pigtail (Included)

  • Includes: Transmitter with pigtail, whip antenna, voltage filter cable, power connection AV cable, user manual
  • Transmitting frequency: ISM 5.6GHz–5.95GHz 40CH
  • Operating voltage: 7V–24V
  • Supply current: 200mA +/- 10mA
  • Video input level: 1V±0.2Vp-p/75Ω
  • Audio input level: 0.5~2.0Vp-p/10KΩ
  • RF output power: 200mW (23.5dBm±0.5dBm)
  • Weight: 0.28 oz (8 g)
  • Dimensions (L x W x H): 1.22 x 0.79 x 0.31 in (31 x 20 x 8 mm)
  • Transmitter connector: SMA

Foxeer Stubby RHCP 5.8GHz Antenna (Included)

  • Includes: Reinforced SMA connector, StayFlex coax cable, case
  • SWR: <1.5, tuned for 5600~5950 Mhz
  • Polarization: RHCP
  • Frequency range: 5600–5950 MHz
  • Gain : 3DBi
  • SWR: <1.5
  • 3dB horizontal lobe width: 360°
  • 3dB vertical lobe width: 120°
  • Polarization: Omni
  • Max power: 50W
  • Resistance: 50 ohms
  • Lightning protection: DC grounded
  • Polarization: LHCP / RHCP
  • Connector: RP-SMA / SMA
  • Size: 2.44 x 1.38 in (62 × 35mm) (feeder line 1.77 in or 45 mm)
  • Weight: 0.42 oz (12 g)

RROSD (PDB + OSD) (Included)

  • Dimensions: 1.42 x 1.42 in (36 x 36 mm)
  • Mounting holes: 1.2 x 1.2 in (30.5 x 30.5 mm)
  • Built-in power distribution and regulators to handle 2s–6s (Maximum current draw on 10V rail: 400mA at 3s/4s, 250mA at 5s, 150mA at 6s)
  • Noise-free output without external capacitor (External capacitor might be needed when vtx solder bridge is set to RAW)
  • 10V and 5V output can be used for VTX/FPV cam and accessories
  • NTSC and PAL can be easily selected using the onboard button
  • Plug and Play (PnP) OSD information: Flight pack voltage, current draw, total current consumption, RSSI, flight timer
  • Maximum motor current 150A total
  • Automatic flight timer shows actual flight time
  • Buzzer after 5 mins of inactivity, low rssi
  • Auto RSSI detection (FrSky and analog compatible), displays in percentage
  • Battery pack alarm blinks the battery voltage when pack voltage hits the set limit
  • On-screen menu allows user to set rssi input, calibrate current sensor, set battery capacity alarm, etc.

Tattu 4S 1300 75C LiPo Battery (1 Included & Option at checkout +$25)

  • Voltage (cells): 14.8 V (4 cell)
  • Capacity: 1300 mAh
  • C rating: 75 continuous
  • C rating: 150 burst
  • Weight: 5.45 oz (155 g)
  • Dimensions (H x W x L): 2.8 x 1.44 x 1.16 in (72 x 36.5 x 29.4 mm)
  • Connector type: XT60

DAL "Indestructible" 4045 Tri-Blade Bullnose (1 Set Included & Option at checkout +$4)

  • Inner diameter: (Prop Mount) 5mm
  • 3.97g a Piece
  • Usage: 150+ Frame
  • 4045 Tri-Blade Bullnose, Pre-Balanced on Dynamic Balancing Machine

FrSky Taranis X9D Plus (Optional, + $190)

  • Includes: Taranis transmitter, 2000mAh NiMH low-self-discharge battery, battery charger adapter, neck strap
  • Full-telemetry RSSI alarms warn you of signal reception problems
  • Self-test of the transmitter antenna
  • 16 channels (more when combined with external module)
  • 60 model memories
  • 64 mixers, 9 flight modes
  • 16 custom curves with 3–17 points each, 32 logic switches
  • Voice or custom sound alerts
  • USB and SD card slot for system expansion
  • Long-range system capable of up to 3x the range of current 2.4 systems
  • Silky-smooth quad-bearing gimbals
  • State-of-the-art open-source software
  • Large 212 x 64 backlit LCD screen
  • Real-time data logging
  • Receiver lock (program locked to aircraft, limited to FrSky receivers running PXX protocol)
  • JR-style module bay for additional RF modules and more
  • Selectable flight mode (1, 2, 3, or 4)
  • 2 timers, count up or down, throttle %, talking, etc.
  • Trims adjustable from coarse to extra-fine with extended and exponential trims
  • Standard trainer jack
  • ARM Cortex M3 32-bit 60MHz
  • Integrates with free CompanionTX computer program (compatible with Windows/Mac/Linux and used to set up models; save, edit, and share you; and simulate your transmitter or model setup)
  • USB connection for firmware upgrades, sound editing, R/W to the microSD card, and integration with CompanionTX
  • Sticks and pots can be calibrated by the end user
  • Multiple language support (radio arrives configured for English language)
  • Open-source, community-driven firmware

Spektrum DX6 Transmitter (Optional, + $200)

  • Virtually unlimited model memory transmitter stores up to 250 models, only populates model list with models the user has configured
  • DSM2/DSMX wireless trainer link
  • 2.4GHz band
  • Patent-pending gimbal design with spring configuration switch
  • Fast 11ms frame rate when used with capable receivers
  • Ergonomically designed case with comfortable rubber grips
  • Direct System Menu Access means there’s no need to power off the transmitter to access all menus
  • Supports Air/Heli/Sailplane model types
  • Easy-to-use AirWare software offers the same proven programming found in more expensive radios
  • AR610 6-channel full-range receiver included
  • Programming capability for most sailplanes, can support 4 sailplane wing types and 3 tail types
  • Supports the most popular Spektrum telemetry sensors
  • Includes 4 AA Alkaline batteries, optional lithium-ion battery with charger (not included)
  • 5 programmable mixes; all mixes are selectable to be normal or 7-point-curve multi-point mixes
  • 7 swashplate types
  • Dual Aileron, Elevon, and V-Tail differential
  • 7 aircraft wing types and 6 tail types
  • 7-point throttle (air and heli) and pitch curves (heli) Adjustable for smooth throttle and pitch curves
  • Intuitive SimpleScroll programming interface
  • Advanced DSMX technology (DSM2 compatible)
  • SD card slot for updating firmware, expanding memory, and sharing setups (SD card is not included)
  • Activate bind mode from the menu or a button without having to power off

FrSky XSR Receiver (Optional, + $26)

  • 2.4GHz receiver with 16ch ACCST, S-Bus and CPPM
  • Smart Port enabled for two-way full-duplex transmission
  • S-BUS output, CPPM output
  • Lighter-weight and physically smaller than X4R
  • Number of channels: 1~16ch from SBUS channel,1~8ch from CPPM channel
  • Operating voltage range: 4.0~10V
  • Operating current: 100mA at 5V
  • Dimensions: (26 x 19.2 x 5 mm)
  • Antenna length: (90 mm)
  • Weight: (3.8 g)
  • Compatibility: FrSky X-series module and X9D, X9DP, X9E, X12S in D16 mode (does not work with D-series module); LBT version only works with FrSky D16-LBT mode

Spektrum XLR Receiver (Optional, + $22)

  • Antenna diversity
  • Auto-bind
  • Serial port supports SRXL or remote/satellite receiver
  • 11ms speed with exceptional range and interference-free operation
  • Works with most flight controllers including the Naze32, CC3D, SP F3 and more
  • Requires SRXL or remote/satellite connection
  • Channels: Up to 20
  • Band: 2.4GHz
  • Voltage range: 3.3V
  • Antenna length: 2.4 in (62 mm)
  • Length: 1 in (26 mm)
  • Width: 0.8 in (21 mm)
  • Height: 0.3 in (8 mm)
  • Weight: 0.11 oz (3 g)

FatShark Dominator V3 Goggles (Optional, + $325)

  • Includes: 9.84 ft (3 m) AV cable, HDMI cable with mini–micro and mini–standard adapters, 1800mAh battery with LED indicator, charge cable adapter, zippered carrying case, DC DIY cable, manual
  • FOV (field of view): 30° diagonal (the same plastic optics as DOMV2)
  • Interpupillary distance (IPD): 2.32–2.72 in (59–69 mm), adjustable
  • Optional diopter lens inserts: -2, -4, -6 dpt
  • Display: 800 x 480 WVGA LCD, polarized LED backlight, NTCS/PAL auto selecting, side/side 3D input, HDMI 16:9, video 4:3 horizontally stretched, current A/C chip only supports to 720p 50/60 Hz, could be upgraded to 1080p in the future
  • Audio: Stereo
  • User controls: Channel selection, volume control, mode selection (wired/wireless), display control, DVR control, HT control
  • Power supply: 7–13 V (2S/3S supply)
  • Power consumption: 390mA wireless/ 230mA direct mode (no RX) (at 7.4V nominal)
  • Driver board: Using the same as HDs, support side/side 3D
  • RF modules: Infinite channel support on multiple bands
  • Head tracker: Modular (not included)
  • Analog DVR: MicroSD support to 32Gb, record rate: 6Mbps (MJPG compression, 30 fps, AVI), file playback (native recording, no codec support), upgradeable via SD card PAL/NTSC, continuous scan auto detect/mode change, auto save if power removed, DVR stays off when not switched on
  • Interface: 3.5mm AV in/out port, power in port, 3.5mm 3p earphone port, mini DIN4 data port (head tracking), microSD insert slot, RF module port, mini HDMI port
  • Mechanical: Ergonomic molded headset with adjustable headband
  • Dimensions: 6.41 x 3.15 x 1.79 in (169.2 x 80 x 45.5 mm)
  • Weight: 5.36 oz (152 g)

XT Marvel Vision 5.8GHz FPV Goggles (Optional, + $99)

  • Includes: Headset, receiver monitor, user manual, magnification lens (x 2), blue film (x 2), sun shield, screw set, AV cable
  • Sensitivity: -90dBm
  • Working frequency: 5.8 GHz
  • Channel: 32 Channels with Raceband
  • Frequency range: 5645–5945 MHz
  • LCD type: TFT LCD Screen/Long Life
  • Resolution: 480 x 272 pixels
  • Aspect ratio: 16:9
  • Brightness: 500cd/m2
  • Video format: NTSC
  • Input signal: AV
  • Working voltage: 5V
  • Power consumption: 500mA
  • Work status OSD display: Battery indicator, channel indication
  • Built-in rechargeable battery: 2000 mAh
  • Working time: 1.5 hrs
  • One-key-search frequency: Yes, button control instead of switch
  • Audio: 6.0–6.5 MHz
  • Dimensions: 6.69 x 6.3 x 3.74 in (170 x 160 x 95 mm)
  • Weight: 13.4 oz (380 g)

For parts and other accessories visit FPVHQ!

Shipping

All orders will be shipped by Massdrop.

Estimated ship date is Mar 7, 2017 PT.

After the drop ends, payment will be collected. To deliver the best value to the group the request will then be submitted to the vendor up front, making all sales final. Be sure to check the discussion page for updates.