SunFounder Q250 250mm FPV 4-Axis Racing Quadcopter
Build Your Own Drone
Ever wanted to make your own drone? Now you can, with this do-it-yourself kit. Powered by four brushless motors, this four-axis drone is built for speed. It runs the firmware of the CC3D flight controller. The 1300 mAh battery offers 11 minutes of flight time, while the included sponge tubes help facilitate a soft landing. Once assembled, you’ll need a remote and receiver to control the drone, of which there are many different options online. You can also hook up an FPV camera to view your flight path in real time.
Note: This drop does not include the remote control and receiver. Limited quantities are available.
Assembly Video
Specs
- Flight time: 11 min
- Working voltage: 11.1V
- Weight: 16.8 oz (476 g)
Included
- Upper Board
- Bottom Board
- Board for Fixing the Camera
- PR301 Li-ion Polymer Balance Charger
- 5V 3A UBEC
- BB Bong 1-8S Battery Indicator
- 12V 1.5A Power Adapter
- 4 XRotor 15A Brushless ESC
- 3S 11.1V 1300mAH T-Plug Li-Po Battery
- CC3D Flight Controller
- Male T-Plug Adapter Cable(100 mm)
- USB cable (black)
- Heat Shrink Tubing (black 100 cm)
- 5 Double-Sided Foam Tape(25mm x 40 mm)
- 20 Nylon Zip Ties( white 150mm x 2 mm)
- 4 Skid Landing Damping Sponge Tube
- 12 Banana Plug Female Bullet Connector (2 mm)
- 12 Banana Plug Male Bullet Connector (2 mm)
- 16 Screws
- Allen Wrench (K2.0)
- Strap for Binding the Battery (black 2 x 20 cm)
- Velcro Tape (10 x 2.5 cm)
- Quadcopter Arm (2 red, 2 white)
- 6040 CW/CCW Propeller (2 green, 2 yellow)
- CW/CCM Motor (2 black bullet, 2 white bullet)
Shipping
Estimated ship date is Jan 19, 2018 PT.
Payment will be collected at checkout. After this product run ends, orders will be submitted to the vendor up front, making all orders final.
Ask the Community!
