I just got mine today, and figured I'd post a bit about it. At least for my initial reactions.
The device measures roughly 2.6cm (1 inch) in diameter and 1.5cm (.6 inch) in width. It comes with 3 balls total (normal purchases are with 1 ball, to my knowledge).
This device is beautiful. I decided to buy the blue one instead of the silver one. It's much smaller than I expected, but it's a good size.
The magnets along the edge are very strong. Strong enough that you can hold the ball, and the base stays attached. The groves on the top/bottom don't have a lot of strength, and the ball will fall out with very little effort. Still, the strength is good enough that you can do a few things with it.
Personally, I really like this device in comparison to a normal fidget spinner. Those are super common, all over the place, very cheap and basically do one thing. This has a lot more functionality besides just spinning. The fact it's playing with magnets is why I got it. I commonly keep a few egg-magnets in my pocket and spin them around when walking, nervous, etc. The downfall of those is that they're brittle. So I buy them in bulk, and when they start cracking, replace them. This device 'feels' more durable, and something that should last a long time.
I do suspect that the finish will start to scratch early. I've seen other comments related to that. Still, if you're careful, especially with storage, you should be fine. It comes with a small bag that you can store it in. The nice thing about the bag is that it can hold all 3 balls and base with no problem, but it's tight enough that the balls will stay on the side of the device. When transporting, this is the best configuration because you're not touching the ball to the finish. So the bag is absolutely perfect for holding these in this manner. The bag has a drawstring, which I'm not the most fond about. I think a small velcro closing would be better for this, since this kinda fabric doesn't work well under a drawstring (doesn't stay closed easily). Although this is a minor concern.
The price is a big thing to talk about. You can find knockoffs of this device that are less than $20. When this device retails for $65, one has to ask 'What is that extra $45 getting me?' This is a valid concern. I think the build quality, and the machined parts of the device are a big one. Something I'm curious about though. Are these made in the U.S. or in China? If they're made in the U.S., I feel like the price increase is definitely justified. If made in China, then my justification for the price difference is a little more moot because you can get these, also machined, for much cheaper.
Edit: I emailed the company and asked them if they make these in the U.S. I got the following response:
The Orbiters are made in the USA, here at our manufacturing facility in Tucson, AZ. There are actually Orbiters being made here as I type this.
The device measures roughly 2.6cm (1 inch) in diameter and 1.5cm (.6 inch) in width. It comes with 3 balls total (normal purchases are with 1 ball, to my knowledge).
This device is beautiful. I decided to buy the blue one instead of the silver one. It's much smaller than I expected, but it's a good size.
The magnets along the edge are very strong. Strong enough that you can hold the ball, and the base stays attached. The groves on the top/bottom don't have a lot of strength, and the ball will fall out with very little effort. Still, the strength is good enough that you can do a few things with it.
Personally, I really like this device in comparison to a normal fidget spinner. Those are super common, all over the place, very cheap and basically do one thing. This has a lot more functionality besides just spinning. The fact it's playing with magnets is why I got it. I commonly keep a few egg-magnets in my pocket and spin them around when walking, nervous, etc. The downfall of those is that they're brittle. So I buy them in bulk, and when they start cracking, replace them. This device 'feels' more durable, and something that should last a long time.
I do suspect that the finish will start to scratch early. I've seen other comments related to that. Still, if you're careful, especially with storage, you should be fine. It comes with a small bag that you can store it in. The nice thing about the bag is that it can hold all 3 balls and base with no problem, but it's tight enough that the balls will stay on the side of the device. When transporting, this is the best configuration because you're not touching the ball to the finish. So the bag is absolutely perfect for holding these in this manner. The bag has a drawstring, which I'm not the most fond about. I think a small velcro closing would be better for this, since this kinda fabric doesn't work well under a drawstring (doesn't stay closed easily). Although this is a minor concern.
The price is a big thing to talk about. You can find knockoffs of this device that are less than $20. When this device retails for $65, one has to ask 'What is that extra $45 getting me?' This is a valid concern. I think the build quality, and the machined parts of the device are a big one. Something I'm curious about though. Are these made in the U.S. or in China? If they're made in the U.S., I feel like the price increase is definitely justified. If made in China, then my justification for the price difference is a little more moot because you can get these, also machined, for much cheaper.
Edit: I emailed the company and asked them if they make these in the U.S. I got the following response:
The Orbiters are made in the USA, here at our manufacturing facility in Tucson, AZ. There are actually Orbiters being made here as I type this.