Hello, I just joined, primarily for the audiophile products. Looking at purchasing the NHT C3 speakers for our new living room. Space is about 15 feet wide by 33 long and they will fire long ways. Space is just for general listening, music room with all equipment is downstairs, so hoping they will fill it with sound nicely. Cheers.
Mar 18, 2024
I received my LCX amplifier and I'm eager to try it out. After reading the instructions I came across a warning,
"Do not modify a single-ended 3-wire cable to connect a 4-pin XLR". The warning goes on to say damage could result and that a commercially purchased cord would operate properly. I had previously purchased a set of Massdrop's AKG 7XX headphones and in anticipation of receiving the LCX I ordered a balanced cable for it (best in the verse cables @ https://bestintheverseaudio.com/ ). Pictures of the cord/connector included.
Now I'm not an electrician or an electrical engineer, but even though these cables were bought from a reputable cable provider, based on the 3 prong connector that the AKG requires, I can't help but feel concerned that this is exactly the sort of situation that I'm supposed to avoid with the LCX. Please advise so that I don't inadvertently cause damage to my new amplifier!
One other question, I also have the Cavallie CTH+ SDAC- it's manual makes no mention of the concern regarding headphone cables; will an improper cord (three prong cord to balanced 4-pin) cause damage with that amp as well?? Thank you for your time and assistance.