Do I Need to Lube My Keyboard Switches?
Figure 1: Sometime around here is a good time to ask that question... If you’re new to the mechanical keyboard hobby, I have no doubt that planning your first keyboard build is a bit of a daunting task. To be entirely honest with you, it’s only a tiny bit less daunting for your second or even third keyboard builds should you stay around a little while longer. You’ve got the keyboard itself to worry about, stabilizers, keycaps, and even switches on top of all of the intangible marks you want your dream keyboard to hit. Switches are especially daunting right out of the gate as there’s just so many options out there to pick from – each with their own unique specifications, manufacturers, and more. Yet, in spite of all of these differences between switches, time and time again I find people always asking about lubing switches as one of their chief concerns when it comes to picking some up. With countless numbers of content creators talking about lubing switches, its no...
Apr 17, 2024
THE BASICS
Default Hot Keys - All Drop V2 keyboards, SENSE75, and CSTM80 Hold FN + listed keys to activate LED Keys
Fn + W: LED Brightness Increase Fn + S: LED Brightness Decrease Fn + E: LED Animation Speed Increase Fn + D: LED Animation Speed Decrease Fn + R: LED Hue Increase Fn + F: LED Hue Decrease Fn + T: LED Saturation Increase Fn + G: LED Saturation Decrease Fn + Q: LED Toggle (All, Keys, Edge, Off) Fn + A: LED Next Pattern Fn + Z: LED Mono Color Mode Fn + X: LED Breathing Effect Fn + C: LED Rainbow Mode Fn + V: LED Rainbow Pinwheel Mode Keyboard Option Keys
Fn + N: Toggle keyboard 6KRO/NKRO (Default state 6KRO) Fn + LCtrl + O: Windows / Mac OS Swap (System / Alt location change) Fn + LCtrl + |\: LCtrl / Capslock Swap Fn + LCtrl + Backspace: Reset Keyboard Default Hot Keys - All Drop V1 Keyboards Hold FN + listed keys to activate LED Keys
Fn + A: LED Pattern - Select previous Fn + D: LED Pattern - Select next Fn + Q: LED Pattern - Decrease scrolling speed (for animating patterns) Fn + E: LED Pattern - Increase scrolling speed (for animating patterns) Fn + Caps Lock: LED Pattern - Change scrolling direction (left to right, right to left, bottom to top, top to bottom, radial center to edge, radial edge to center) Fn + W: LED - Increase brightness Fn + S: LED - Decrease brightness Fn + Tab: LED - Toggle breathing effect Fn + X: LED - Toggle all LEDs off/on Fn + Z: LED - Toggle mode (keys + edge, keys only, edge only, all off) Fn + R: LED - Increase brightness of edge LEDs only (up to brightness of keys LEDs) Fn + F: LED - Decrease brightness of edge LEDs only Fn + V: LED - Toggle every other edge LED off Media Keys
Fn + Page Up: Volume Up Fn + Page Down: Volume Down Fn + Print: Mute Fn + Insert: Play/Pause Fn + Home: Stop Fn + Delete: Previous Fn + End: Next Keyboard Option Keys
Fn + N: Toggle keyboard 6KRO/NKRO (Default state 6KRO) Flashing
Fn + B (hold for three seconds then release): Put keyboard into firmware flashing mode (also referred to as “resetting the keyboard”)
CONFIGURING YOUR KEYBOARD 1. Download the Drop Keyboard Configurator application.
- If you use Windows, download here.
- If you use a Mac, download here.
2. Launch the Drop Keyboard Configurator application. After the application launches, make sure your keyboard is identified and then click Configure Keyboard. If you are using a CTRL V2, ALT V2, or SHIFT V2 keyboard, your keyboard will be recognized right out of the box. If you are using a SENSE75, CTRL V1, ALT V1, or SHIFT V1, first go to the "FLASHING YOUR KEYBOARD" section below."- By default the keyboard will be set to Advanced mode with no safeguards. Remember with layers to always create ways to return to your home layer
- Momentary mode is also available for those looking for some customization with guardrails.
- Remember Boot Magic is always available to wipe your EEPROM and reset the keyboard back to factory settings.
- You can access Boot Magic by holding down the ESC key while your keyboard is disconnected.
- While holding down the ESC key, plug in your keyboard.
Once connected you can let go of the ESC key and the keyboard should be reset.FLASHING YOUR KEYBOARD 1. Launch the Drop Keyboard Configurator application. After the application launches, click “Flash Firmware”.
For CTRL V1, ALT V1, SHIFT V1 users that would like to continue using the older web-based configurator, see instructions here.