CAD AS22/M179/EPF15A Bundle
CAD AS22/M179/EPF15A Bundle

Home-Studio Kit

Equipped with an acoustic enclosure and a condenser microphone, the CAD Audio AS22 with CAD Audio M179 Bundle gives you the tools to set up your own studio in your home. In this drop, you will receive a CAD Audio AS22 acoustic shield, a CAD Audio M179 microphone and CAD EPF15A Pop filter.

CAD AS22/M179/EPF15A Bundle

CAD Audio Acousti-Shield 22

Built from a combination of 16 gauge perforated stainless steel and high density micro cell acoustic foam, the CAD Audio Acousti-shield 22 reduces outside interference to keep your voice strong and true. After mounting easily onto your mic stand with included hardware, the device reduces reflections, echo, and any environmental meddling. With extra stability from the mounting design, flexibility to tailor the shield to different microphone builds or sound profiles, and portability for the producer on the go, the Acousti-shield 22 lets you clean up your vocals without investing a few paychecks.

CAD AS22/M179/EPF15A Bundle
CAD AS22/M179/EPF15A Bundle
CAD AS22/M179/EPF15A Bundle

CAD Audio M179

The CAD M179 is a side address studio condenser microphone that offers an exceptional performance for its price range. It features a dual pattern, gold sputtered, 1.1” diaphragm that supports a frequency response range of 10Hz to 20kHz. Its design incorporates a variable pattern control dial, which allows you to select your preferred pattern between cardioid, omni-directional, and Figure 8. Also included is a 20dB pad switch as well as a high-pass filter switch. In order to operate, the M179 needs 24V or 48V phantom power.

CAD AS22/M179/EPF15A Bundle
CAD AS22/M179/EPF15A Bundle
CAD AS22/M179/EPF15A Bundle

CAD Audio Acousti-Shield 22 Specs

  • CAD Audio
  • 16 gauge perforated stainless steel
  • 53 mm high density micro cell acoustic foam
  • Advanced mounting design
  • Flexible positioning

CAD Audio M179 Specs

  • CAD
  • Side address, external bias condenser
  • Polar pattern: Variable: Cardioid, omni-directional, figure 8
  • Frequency response: 10Hz to 20kHz
  • Dynamic range (typical): 133 dB
  • Signal-to-noise ratio: Equivalent noise level: 11dB equivalent SPL, A weighted
  • Maximum input sound level: 143 dB SPL (with pad on)
  • Power Requirements: Minimum requirements are 24 or 48 Volt phantom power capable of delivering at least 8 mA
  • Output impedance: Low (200 ohms nominal)
  • Output connectors: 3-pin XLR-male
  • Pad: 20dB
  • Low frequency roll-off: 80Hz
  • Length: 7 in (177.8 mm)
  • Diameter: 2.25 in (57.2 mm)
  • Weight 17.8 oz (506 g)

Shipping

All orders will be shipped by Massdrop.

Estimated ship date is May 8, 2015 PT.

After the drop ends, payment will be collected. To deliver the best value to the group the request will then be submitted to the vendor up front, making all sales final. Be sure to check the discussion page for updates.

Recent Activity

Pinz

Joined the drop

Recent Activity

Pinz

Joined the drop