Mionix Avior 7000 Series Mousesearch

Mionix Avior 7000 Series Mouse

Mionix Avior 7000 Series Mouse

bookmark_borderSave
Where's the price?
To negotiate the best possible price for our members, we must agree to hide our prices externally.


Add a comment...
Just wanted to give some feedback - I bought this mouse from a drop in 2015 and now need to replace it due to the left button developing a double click. Overall was just ok, had hoped to get a few more years from it. The scroll wheel wasn't great either and it's button stopped working at about the 1 year mark. Would not recommend this mouse.
This is a great mouse! Smooth and comfortable. I only wish there were a couple more sensitivity stages. It comes with 3 stages of sensitivity, which is fine, but I think five stages would be better. I also wish this along with many other mice would come with a toggle button by the thumb where if you hold it down the sensitivity will be lowered until you stop pressing it. This can be helpful in games, and it would also help me a lot with working in my DAW. Any application with the need to fine tune things at random times would benefit from a sensitivity toggle button at the thumb.
I'm not seeing the Naos 7000 as an option either.
Je_Saist
Same here :(
I don't see the Naos 7000 option during check out. Is it just me or anyone having the same problem as well?
Does anyone know of a mouse with similar ergonomics to the Naos 7000? I love mine, but the scroll wheel is malfunctioning. I bought it maybe 6 months ago. I don't really want to take a chance on another one after reading some of the comments here.
Load 3 more comments
No idea about the internals. Didn't look that far.
SomeTechNoob
Thanks for the suggestion :)

I'll read up on the Dream Machine.
FYI for any who may want one of these. Don't waste your money! No I'm not throwing my mice or using them as wheel chocks. I have mice that are literally knockoffs of knockoffs and yet they are better built than this. Hell I have mice I use daily that are almost old enough to legally drink.(Microsoft Trackball Explorer being the oldest.)

TLDR; Save your money and avoid the mistake I made. My mouse died due to poor QC and cheap parts and the "warranty" from Mionix assumes that you can even get a response from them.

Mionix support is utterly nonexistent at the best and a joke at the least.

IF you somehow manage to get a response from support on a mouse you buy from Massdrop you are likely to be told to talk to Massdrop.
https://support.mionix.net/hc/en-us/articles/360000041926-How-do-I-claim-my-warranty-
We have agreements with retailers  and the easiest and fastest way to claim a warranty is by going directly to the retailer where the product was purchased from. 

Contact Table
Origin of Purchase Contact
Mionix Web Store Mionix
Other online store Other online store
Physical store Physical store

Mionix refuses to cover issues that were caused BY them during manufacturing.

https://support.mionix.net/hc/en-us/articles/115004680726-What-does-the-warranty-cover-
What is not covered:
  • Defects caused by manufacturing.

The issues below are from Day 1 until Garbage day. This includes issues that happened after I gave up on Warranty support ever responding.
From the factory the cable was pinched in two locations and failed due to poor QC. The skates on the mouse are evidently made from the thinnest and softest PTFE possible and have the longevity to match. The mouse wheel (both the "rubber" on the wheel and the entire assembly overall) are made out of some of the cheapest materials I have seen in a LONG time. The vinyl decal on the inside of the wheel you have to block some of the bleed through from the RGB wasn't cut even close to the correct dimensions. The adhesive on the vinyl doesn't adhere to the "plastic" you used for the entire scroll wheel assembly. The "rubber" on the wheel is breaking down from normal use to the point that it scrolls independently of the wheel and even jams scrolling on occasion. The entire scroll wheel assembly is made from such cheap low quality plastic that it has no reinforcement and fails from normal use.

Mine is dead and dumped in the garbage since it appears that Mionix has no QC and handles warranty support by ignoring you in the hopes that you go away.

Adragontattoo
FWIW my Mionix Castor's (heavily used) middle mouse button died less than a year after purchase (which also happened to 2 logitech g300s before that). I can't say anything about their warranty service, didn't bother trying.
Adragontattoo
You had the same experience as I did. Mionix customer support is utter trash and never to be trusted. Two keyboards died and they offered me a mouse pad, lmao!
Hope this comes again ASAP
MionixTeam , the shape of this mouse looks really lovely, any plans to make one with more buttons?
well I requested it as well, but won't wait long, if they don't do a drop on it soon I'll just go buy me a new one at fry's or something cause my old one the wheel got bad but it lasted a long time, had owned like over 20 something mouse and this is by far the best mouse, comfortable and accurate if you're right handed, they don't have a leftie version.
mamucas
Same here! my favourite mouse. Just randomly started acting up with random clicks happening. without me pressing. I was so devastated. By far the best tracking, comfort and perfect balance of weight for my usage.
Muzzi87
I already order mine, I was buyer #6 on this drop. I even felt tempted to buy a second one to have it as back up just in case LOL
This is the best mouse i've ever owned, too bad the sensor got bad
Load 3 more comments
how does this mouse compare to the kone pure in terms of size? I have pretty small hands so I'm not sure if this will be comfortable for me
carrymesempai
Our Avior 7000 is 10mm longer however 5mm less in width and 2mm less in height :)
mm saved in width to accommodate smaller hands, and you can then adjust hand position with the extra length
Most comfortable mouse for a palm grip I have ever held.
That being said, I feel like I'm having tracking issues and my mouse sometimes skips, and I'm using a great mouse pad (the Glorious PC Gaming Race one). Hope they will resolve as I love the mouse's build.
LoganjRichards
exact same issue, and was my favourite mouse with perfect sizing. I'm so disappointed. They have many quality control issues and don't have enough faith to invest in another one even though it was perfect whilst it worked. They need to do a overhaul and release a 2.0.
Muzzi87
I agree! I have had to switch mice for gaming because the sensor just doesn't cut it. Love it for daily use though... damn shame