To negotiate the best possible price for our customers, we agree to hide prices prior to logging in.
273 requests
Product Description
No more fighting over outlets. The Naztech 6 Wall Charger is fitted with six (count ‘em!) USB ports to power all of your devices like smartphones, tablets, and more (on Android or iOS) Read More
I've just received my unit and 5 of the 6 USB ports don't align with the bezel and I can't plug a USB cable into them. Kind of disappointed. Haven't plugged it into the wall yet to test charging functionality as there's no point at this stage.
JvabhiMy bet is US pins on the AC cable. Luckily the can be replaced with a locally sourced one with the pin configuration of your desires. Probably quite cheap too.
I've noticed that a lot of these devices will support 2.4 A on multiple ports, but never have enough total output to support it on all the ports at once, although I could be misunderstanding the spec's. Do anyone have any idea why this would be ? The last thing I need in my life is more details to track like which ports support which .. I would love to just have a charger that no matter how much I plug into or where it will automatically provide the maximum fastest charge.
EverythingIsBetterOutdoorsThis has the power for 4 at 2.4A. 55W total output capability, but you need to understand how and what the limitations are.
Watts = Amps (A) x Voltage(V). USB is always 5V unless you use quick charge.
The top two ports have the ability to output 2.4A at 5V if that's what your device needs... or 12W total power. However they can also output more at higher voltages, like 9V x 1.8A = 16.2W. This is for quick charge devices.
The two tablet ports are limited to 2.4A 5V output and therefore will only consume 12W each, so you could power 4 devices at 12 W if you wanted. But the two ports below those are only rated at 1A.
1A x 5V = 5W. So these will not charge at the same speed by design. If you did populate all the ports there would be slight throttling, as the device is not capable of outputting more than 55 Watts, but is also constrained by its other specs, like 10A draw max.
If we consider just the top 4 though, 12W X 4 ports = 48W total. Also, if we're worried about amps, 4 X 2.4A = 9.6A draw so you're good there... but if you just had to add in the slower 2 x 1A 5V ports (5W), you would go over on both watts (58W) and on amperage (11.6A). In that scenario, throttling would occur.
The good news is that because of the variance in cables and device needs (they won't draw more than their spec is rated for) you'll probably never be able to actually use all that wattage, barring perhaps several high voltage QC devices on the top two ports instead of the 2.4A ones (in our example) along with everything else.
mcrommertIf you ever notice variance in cost for similar type items especially big difference in cost. Beware. Example a manufacture claims 27000 mAh capacity on a powerbank and it cost $40.00 but another manufacture charges $80.00....Red Flag. Most likely the less expensive PB is not a true 27000 mAh PB. Most consumers do not have the ability to test products so the some manufacturer's take advantage of this and the consumer. If it's too good to be true it probably is....
I just recdived mine. I plugged it in and none of the outlets work. I tried both an android phone and an iPad. Neither of them seem to be receiving power. Am I missing something?