Add a comment...
Was going to go on about how they ripped off the Corsair K series aluminium keyboards but they openly stated that they ripp off the Corsair design (they said case instead of keyboard so they would not get sued) and as a proud owner of the Corsair K70 RGB Rapidfire I would want this but there is NO black colour for the top plate and it won’t match my setup
With the shipping fees, there isn't much of an actual steal on this drop. It'll end up like a dollar cheaper than it retails for.
Found a cheaper one available at https://www.blinq.com/detail/electronics/computer-accessories/keyboards-mice/npkc-no-keycaps-no-o-rings-17-switch-tester and ordered it instead. No wait either. Limited supply though.
I already informed MassDrop about this but they still went ahead and put the drop out again. DO NOT TRUST THE IMAGES. The colors are LIES and MassDrop doesn't seem to care.

https://imgur.com/WyqF5lE
TelFiRE
I like your color even more actually.
elgoto
Well, I hate it. It's not what I bought and it was a bummer to wait months for what I thought was the perfect color only to get a color I'm not even remotely interested in.
Any updates on if the PCB is available separately or will be? I already know about Dirty PCBs, I don't want a 10 pack.

Also, how's Version 3 of the PCB?
Is there any way to change the led lighting mode? Default seems to be numlock on and all other keys react when any key is pressed. Can I change that to all on all the time?
As a switch tester it's perfectly functional. It is, however, not cast aluminium (it's cut/bent) - the anodising is nice and even though. And mine's come out more or less the colour I expected.

The extra circuit board (at least on mine) is a poor fit. I suspect I'm going to have to drill out and wire at least two of the connections as the board won't fit in place with the keys inserted. The keys were inserted in the wrong orientation to fit the board, and required some fairly significant bending once corrected to get the pins to fit. That is pretty disappointing.
Wow. How insanely disappointing. The color I received was not even remotely close to the one in the pictures.
TelFiRE
Sorry for the poor quality editing but you can tell there's zero similarity between the colors. They might as well have sent me an orange one, I don't want this. I bought for the color.

http://imgur.com/WyqF5lE.jpg
Can I buy JUST the PCB? Mine shorted out from the last drop.
Load 3 more comments
Hopefully @Durnlaw already found this if that's the route they went, but for anyone else looking, the BOM for that PCB is here: https://github.com/VinnyCordeiro/tmk_keyboard/blob/master/keyboard/AUNK_Numpad/BOM.txt
taswyn
Thank you kindly. :) The project had to be placed on hold but this will be useful for when I can start again.
Is there a top view of the keycaps, I'd like know if the switch color can be seen from above.

Also, with keypad PCB (+ $9), would this include the cord (idk)->usb to power it?
mattysaw
massdrop pls
The plate has definitely been stamped, not cast.
I have one of these with the PCB and it works fine except the LEDs are on the bottom instead of the top so lighted keycaps don't look as good as they could. But as a cheap numpad it works fine.
What kind of O-Rings were used in this drop?
Pin is not joined on PCB board.

Recent Activity

Joined the drop

GuyBlasphemy

Joined the drop

ReaperNull

Joined the drop

Recent Activity

Joined the drop

GuyBlasphemy

Joined the drop

ReaperNull

Joined the drop