Elecrow ESP8266 IoT Weather Station Kit
Climate-Based Experimenting
This kit gives you the tools you need to start experimenting with climate data. It features two Crowtail- ESP8266 NodeMCUs, which will serve as the springboard for your ideas. Next up is the Crowtail temperature and humidity sensor, which can simultaneously measure the temperature and humidity and then offer a digital signal output. Also included in the kit is a water sensor and UV sensor, allowing you to detect rain and the intensity of the sun’s rays. The IoT boards help display the information across the OLED display. Feel free to write your own code for your experiments or find sample code online to get started.
Specs
- ESP8266 nodemcu kit
- Weather station kit
- Low standby power
- Smarthome application
- Working voltage: DC 3.3V-5V
- Best transmission distance: ≤ 20 m
- Weight: 4.5 oz (128 g)
- Dimensions: 5.7 x 3.4 x 1.4 in (14.6 x 8.6 x 3.5 cm)
- Crowtail- ESP8266 Node MCU:
- Compatibility: Crowtail interface
- ESP8266 at 80MHz with 3.3V logic/power
- 4MB of FLASH (32 MBit)
- Built-in Wi-Fi 802.11 b/g/n
- 3.3V regulator with 500mA peak current output
- CP2104 USB-Serial converter onboard with 921600 max baudrate for uploading
- Auto-reset support for getting into bootload mode before firmware upload
- 9 GPIO pins (can also be used as I2C and SPI)
- Analog inputs 1.0V max
- Built-in 100mA LiPoly charger with charging status indicator LED
- Pin #0 red LED for general purpose blinking
- Pin #2 blue LED for bootloading debug & general purpose blinking
- Power/enable pin
- 4 mounting holes
- Reset button
- Dimensions: 2 x 1.4 in (5 x 3.5 cm)
Included
- 2 Crowtail- ESP8266 NodeMCUs
- Crowtail- temperature & humidity sensor
- Crowtail- OLED
- Crowtail- water sensor
- Crowtail- UV sensor
- (2) 30 cm micro USB cables
Shipping
Estimated ship date is Feb 11, 2019 PT.
Payment will be collected at checkout. After this product run ends, orders will be submitted to the vendor up front, making all orders final.
Ask the Community!
