Focusrite 6i6 USB Audio Interface
Focusrite 6i6 USB Audio Interface

Focus on Quality

Fans of Focusrite’s line of USB 2.0 audio interfaces will notice the sleek, optimum design of the Focusrite 6i6. For recording high quality sound, the 6i6 features analogue/digital conversion capabilities, two preamplifiers, and a 6 in / 6 out audio interface.

Focusrite 6i6 USB Audio Interface
Focusrite 6i6 USB Audio Interface

Amazing Sound

The design features a protective aluminum outer case to minimize electrical noise, and gain knobs for each mic input that display a green light to indicate when input is detected. The included Red 2 and Red 3 plug-in suite utilizes the design of both the red 2 equalizer and red 3 compressor for the best of both worlds. The Scarlett Plug-in suite is a versatile compression, gating, EQ and reverb suite for ultimate music mixing.

Focusrite 6i6 USB Audio Interface
Focusrite 6i6 USB Audio Interface

Specs

  • Focusrite
  • Analog inputs: 2 x XLR/TRS combo jack - Mic/Line/Hi-Z Instrument
  • 2 x 1/4" TRS - Line In
  • Digital inputs: 1 x RCA coaxial S/PDIF stereo
  • 1 x 5-pin DIN - MIDI input
  • 1 x 5-pin DIN - MIDI output
  • Analog outputs: 4 x 1/4" TRS - Line Outputs
  • Digital outputs: 1 x RCA coaxial - S/PDIF stereo output
  • Headphone outputs: 2 x 1/4" TRS stereo
  • USB connector: 1 x USB 2.0 type B
  • Dynamic range: A/D: 104 dB CCIR-RMS (all inputs)
  • D/A: 102 dB CCIR-RMS (line outputs)
  • Sample Rates: 44.1, 48, 88.2, 96 kHz
  • Bit depth: 16-, 24-bit
  • Clock jitter: < 250 ps
  • Phantom power for mic inputs: +48V, switchable
  • Microphone
  • Frequency response: 20 Hz ± 0.5 dB, 20 kHz ± 0.1 dB (min. gain)
  • THD+N: -96 dB (1 kHz, –1dBFS, 20 kHz BW)
  • Noise (NiPoS): –122 dBu CCIR-RMS (measured at 60 dB of gain with 150 ohm termination
  • Maximum input level: > +9 dBu
  • Line
  • Frequency response: 20 Hz ± 0.5 dB, 20 kHz ± 0.1 dB (min. gain)
  • THD+N: -80 dB (1 kHz, –1dBFS, 20 kHz BW)
  • Noise (NiPoS): –105 dBFS CCIR-RMS (measured at min. gain with 50 ohm termination)
  • Maximum input level: > +28 dBu
  • Instrument
  • Frequency response: 20 Hz ± 0.3 dB, 20 kHz ± 0.1 dB (min. gain)
  • Noise EIN: –103 dBFS CCIR-RMS (measured at min. gain)
  • Maximum input level: +8 dBu (without pad)
  • Line outputs 1 and 2
  • Maximum output level (0 dBFS) +11dBu, balanced
  • THD +N: -100dB (1 kHz, –1dBFS, 20 kHz BW)
  • Height: 2 in (50 mm)
  • Width: 8.2 in (210 mm)
  • Depth: 7 in (180 mm)
  • Weight: 41 oz (1.18 Kg)

Included

  • Red 2 and Red 3 AAX plugins

Shipping

All orders will be shipped by Massdrop.

Estimated ship date is Mar 30, 2015 PT.

After the drop ends, payment will be collected. To deliver the best value to the group the request will then be submitted to the vendor up front, making all sales final. Be sure to check the discussion page for updates.