To negotiate the best possible price for our customers, we agree to hide prices prior to logging in.
2.3K requests
Product Description
The Magic Flight Launch Box Finishing Grinder creates a micro-fine grind that will revolutionize your vaping experience. Each grinder is hand finished by one of MFLB’s skilled artisans Read More
Exciting update! We’re happy to report that all of the orders have been shipped out from our warehouse and are now on the way to you! Please allow 24-48 hours for tracking to get into the shipper's system and start updating.
If there’s anything else we can do to make your Massdrop experience better, feel free to contact us via “Contact Support” button in your transaction page: https://www.massdrop.com/transactions.
Thanks again for joining this drop! With your help we were able to make it successful for the community. We've just submitted the group's order with the vendor for the MFLB Finishing Grinder and they are working hard to prepare it for shipment.
As soon as the group's order is ready at the vendor's location, they will send the bulk shipment to our warehouse in New Jersey where our warehouse team will break it up into individual orders and ship them directly to you! The current estimated ship date from our warehouse is 9/2.
Rest assured that we we will provide you all with updated information regarding the status of your order throughout the process. You can expect an update from us by the end of the day Pacific Time on 8/27.
I agree with the previous poster, it's not as hard to use as Karazi says. However I do agree/recommend that you use material that's pretty dry if at all possible. This is true with all grinders but especially the FG here.
The key is that the FG shouldn't really be your primary grinder, and it doesn't work too well if all you do is break up your nugs by hand first. It is called the "finishing" grinder after all, and it works much better with stuff you've already ground up in your primary 2- or 4-piece grinder. In my experience, that leads to very nice and easy grinding with the FG that doesn't require too much force at all, until finally all that's left behind are little bits of stem pieces that I don't want in the trench (or bowl or whatever) anyway.
I'll admit I was concerned at first about the wooden grooves wearing down, but it's still working just fine at the moment so I guess it hasn't happened to me yet (owner for 1.5 years).
Also note that this does come with the lifetime MFLB warranty, which the above user Karazi may wish to inquire about, to replace his worn-down unit for free. As the Finishing Grinder has no serial number on it (unless that's changed since I bought mine), there shouldn't be any question about whether MFLB will honor the warranty when bought through MassDrop. I've never needed to make a warranty claim on the FG (like I have the MFLB itself and the Power Adapter) but hey, it's nice to have the extra peace of mind.
Does not take as much effort as the above reviewer describes. It's a grinder like any other.
Ok you can't put a whole flower in there but it does not take that long (15 seconds?) to split into pieces. It's the best grinder on the market for vaporizers. It does take a little bit of force, but so what? It's the best grind you can possibly get for vaping.
Sorry to rebute and I don't mean to be that guy but I've had this grinder for nearly a year and a half and it still works with the same amount of effort.
Someone needs to 3d print an adapter for the pax vaporizer for this to drop the herb straight in like when used with the mflb.
This grinder is for very specific circumstances. I would not recommend this grinder unless you are willing to break up your flowers into pretty small chunks by hand, and only if buds are Very dry. If these conditions are not met all this grinder does is flatten the bud requiring a lot of force to grind, then it gums up the grinding surface which then needs to be de-gunked. In addition, the wood grooves meant to assist with grinding wear down making it even less effective. The decreased grinding effectiveness requires more strength to perform a grind which is a problem because the tiny grinder is very uncomfortable to hold with fingertips, as that's all that fits. This is not a pick up and go grinder, I guess it is for very dedicated individuals who want to go the extra mile. In that case, I suppose the grind could be considered superior to a more typical grinder for vape usage, but for me, a vaporist, I am going to make the switch back as this grinder is just not meeting my needs. I am disappointed in my purchase and could have put that money towards a more forgiving grinder.
Great news group! We’re happy to report that all of the orders have been shipped out from our warehouse and are now on the way to you! Please allow 24-48 hours for tracking to get into the shipper's system and start updating.
If there’s anything else we can do to make your Massdrop experience better, feel free to contact us via “Contact Support” button in your transaction page: https://www.massdrop.com/transactions.
We're also on Instagram! We'd love to see the photos of drops you've received and you can do that by following @Massdrop and tagging your pictures #massdrop. https://instagram.com/massdrop
Great news group! The vendor has let us know that the group's order was picked up and is on its way to our warehouse now. Based on the tracking provided these are scheduled to come in 7/23. Our warehouse team has been forwarded tracking info and will be standing by, ready to get these packed up and turned around as soon as they come in.
Sometimes shipments get delayed en route, not to worry as we will keep the group posted throughout the process and notify you all if anything causes delay.
Thanks for your patience and expect an update from us on 7/24 or sooner if something comes up.
Thanks again for joining this drop! With your help we were able to make it successful for the community. We've just submitted the group's order with the vendor for the MFLB Finishing Grinder and they are working hard to prepare it for shipment.
As soon as the group's order is ready at the vendor's location, they will send the bulk shipment to our warehouse in New Jersey where our warehouse team will break it up into individual orders and ship them directly to you! The current estimated ship date from our warehouse is 7/24.
Rest assured that we we will provide you all with updated information regarding the status of your order throughout the process. You can expect an update from us by the end of the day Pacific Time on 7/20.
Great news group! We’re happy to report that all of the orders have been shipped out from our warehouse and are now on the way to you! Please allow 24-48 hours for tracking to get into the shipper's system and start updating.
If there’s anything else we can do to make your Massdrop experience better, feel free to contact us via “Contact Support” button in your transaction page: https://www.massdrop.com/transactions.
We're also on Instagram! We'd love to see the photos of drops you've received and you can do that by following @Massdrop and tagging your pictures #massdrop. https://instagram.com/massdrop