RC4WD Trail Finder 2 "SWB" Kit w/Motor & ESC Option

RC4WD Trail Finder 2 SWB:

• Wheel type: 1.9 5 lug Wagon Wheels
• Wheel hub: Pin type
• Wheel width: 25 mm
• Back spacing: 11mm
• Wheelbase: 9.9 in (242 mm)
• Hammer transfer case ratio: 1.47:1
• Gears: Wide 32P steel gears
• R3 single-speed transmission ratio: 1.78:1
• Pinion/spur 14/64: 4.57:1
• Cast Yota 2 axles ratio: 15/40 = 2.67:1
• Width at hex: 176.5mm
• Trailfinder 2 SWB Chassis
• Width: 8.3in / 211 mm
• Height: 5.55in / 141 mm
• Ground clearance: 2.3 in (58.5 mm)
• Overall length: 15.31 in (389 mm)
• Weight: 62.1 oz (1.76 kg)

FX-R Specs: (Combo Option)

• Controls: Forward / Brake & Drag Brake / Reverse
• ON resistance: 0.0012 Ohm
• Input voltage: 4-9 Cells / 2S Lipo (Crawler Spec: 3S Lipo with 35T or higher motor)
• BEC: 6.0V / 3.0A
• Motor limit: 13 Turn
• Throttle profiles: 7 choices on board
• Reverse type: 3 Choices
• Reverse strength: 11 Steps
• Dimensions: 1.1 x 0.80 x 0.40 in (28 x 20x 10 mm)

Tekin 35T Heavy-Duty T-Series Brushed Motor: (Combo Option)

• Dual precision ball bearings
• High-torque specification
• High-strength ferrite magnets
• Completely rebuildable
• Legal in rock-crawling competitions
• Input voltage: 2S-4S LiPo / 4-12S NiMH-NiCD
• Weight: 6 oz (171 g)
• Shaft dimensions: 3.2 mm x 11.3 mm
• Motor diameter: 1.4  in (35.8 mm)
• Motor length: 2.1 in (52.5 mm)
• Magnet material: FB12 Ferrite (HD)

Not Included

Tools

Body

Electronics (motor, ESC, radio, receiver, battery, and charger)