MaceTech RGB LED Shades Kitsearch

MaceTech RGB LED Shades Kit

MaceTech RGB LED Shades Kit

bookmark_borderSave
(5 reviews)
Where's the price?
To negotiate the best possible price for our members, we must agree to hide our prices externally.


Bright Arduino-Compatible Sunglasses

Stand out at your next party, trade show, or music festival with these bright programmable sunglasses. Packed with a grid of lights across the front, these hackable shades can display a wide range of colors, animations, and movements. From the inside, they offer an unobstructed view, but from the outside they’re as bright as can be. The RGB version features 68 programmable full-color RGB LEDs. If you don’t have programming experience, they come with dazzling pre-set modes right out of the box. The Matrix LED version (available in blue or white) has a whopping 166 LEDs. Both are Arduino compatible, meaning you can program them to display just about anything. The RGB version will last around 3 hours on a single charge, while the LED Matrix version will last up to 8.

Note: At checkout, choose between the RGB Shades and the LED Matrix Shades. Both are available in blue or white. You can also add the SainSmart ES120 rechargeable screwdriver (+ $89.99), and the SainSmart Pro 32-piece soldering tool set (+ $59.99). 

MaceTech RGB LED Shades Kit
MaceTech RGB LED Shades Kit
MaceTech RGB LED Shades Kit

LED Shades Demo

RGB Shades Demo

Specs

RGB Shades

  • Display area: 68 WS2812B RGB LEDs (16 x 5) logical matrix
  • Display bit depth: 256-level PWM brightness control of each color on each LED
  • Display brightness: Global brightness control of full array (up to 256 levels)
  • Power supply: 5V 1A (through mini-USB connector)
  • Battery life: ~3 hours on 2000 mAh battery pack, variable
  • On-board processor: ATmega328P at 16MHz, Arduino-compatible bootloader
  • Communications: Built-in FTDI USB-RS232 converter
  • Auxiliary interface: I/O pins available for hacking
  • Open source hardware

LED Shades

  • Display area: 166 single-color LEDs (24 x 8 logical matrix)
  • Display bit depth: 256-level PWM brightness control of each LED
  • Display brightness: Global brightness control of full array (up to 256 levels)
  • Power supply: 400 mAh Lithium-Polymer battery
  • Battery life: 3 - 8+ hours depending on pattern and brightness
  • Charging supply: Charge from any USB port, 250mA maximum drain
  • Charge indicators: USB power and charging indicator LEDs
  • On-board processor: ATmega328P at 8MHz, Arduino-compatible bootloader
  • Communications: Built-in FTDI USB-RS232 converter
  • Sensor input: Built-in ambient light sensor
  • Auxiliary interface: TTL-serial and I/O pins available for hacking

SainSmart ES120 Rechargeable Screwdriver (Optional)

  • Work voltage: DC3-5V
  • Material: 304 stainless steel
  • No-load speed: About 270 rpm
  • Electronic torque: 2.8 kgf.cm
  • Maximum torque: 30 kgf.cm (manual mode)
  • Screwdriver bit: 4M hexagon
  • Charging time: 45 minutes
  • Running time: 30 minutes (full power)
  • Charging mode: Micro USB 5V input
  • OLED screen
  • Battery: 10440 lithium-ion
  • Rotor: Bi-directional overrunning clutch
  • Gearbox: 1:144 integrated planetary gearbox
  • Motor: 25,000 rpm brush motor
  • Main chip: STM32
  • Sensor: Angular velocity sensor

SainSmart Pro 32-Piece Soldering Tool Set (Optional) 

  • Operating voltage: 12V to 24V
  • Power: 17W to 65W
  • Screen: OLED
  • USB port: Micro USB
  • Power port: DC5525
  • Temperature stability: ± 2%
  • Soldering tip resistance to ground: < 2Ω
  • Temperature range: 212–752°F (100–400°C)
  • Dimensions, control part: 3.8 x 0.6 in (9.6 x 1.65 cm)
  • Dimensions, heating part: 2.8 x 0.2 in (7.2 x 0.55 cm)
  • Compliant with EU certification: CE FCC
  • Included w/ SainSmart Assembled 3-Axis Desktop Robotic Arm
  • 3 servo motors
  • 2 multifunction steering brackets
  • 2 long U-shaped brackets
  • A-shaped bracket
  • 2 cup bearings
  • Alloy mechanical gripper
  • Hardware

Included

RGB Shades

  • LED front PCB
  • Controller PCB
  • Hacker PCB
  • Frame PCB
  • Hinge PCBs
  • Heat shrink
  • M3 hardware
  • Hex wrench
  • Nose pad
  • Control cable
  • Thin USB cable
  • Soft carry case
  • Instructions

LED Shades

  • LED Matrix Shades
  • Mini-USB cable
  • Soft sunglasses case

Included w/ ES120 Electric Screwdriver

  • Electric screwdriver
  • SL2.0 straight screwdriver bit
  • PH00 hex screwdriver bit
  • ES-B7 screwdriver bits set (7 pcs)
  • ES-A7 screwdriver bits set (7 pcs)

Included w/ Pro 32-Piece Soldering Tool Set

  • Pro32 digital soldering iron
  • PR-I soldering tip
  • B2 and BC2 soldering tips
  • Hex key
  • 19V power supply
  • Solder tip cleaning ball

Shipping

All orders will be shipped by Massdrop.

Estimated ship date is Mar 11, 2019 PT.

After the drop ends, payment will be collected and the group’s order will be submitted to the vendor up front, making all sales final. Check the discussion page for updates on your order.